T
I have an ACME control transformer. I have connected the primary with two phases, and the output I took 230V from secondary. When I measure across the secondary terminals, I get 230V. When I measure one of the secondary with the earth terminal, I get 150v or may be less and measuring the other terminal with the earth terminal of the transformer I see more than 70v. This was confusing me so I measured from my control panel across the neutral and earth terminal and found to have more than 80v.
I have a question, if i connect one of the secondary terminal to the earth terminal of the transformer will i get 230V and solve my issue?
I have a question, if i connect one of the secondary terminal to the earth terminal of the transformer will i get 230V and solve my issue?