Search results

You got to define AXIS mode operation area work.. in the code ...like zw or xy..

You are welcome !

Have a read on page 86 of OEM manual you got a clear example for this case...

Label is not right

My friend You are using command for linear interpolation mode with declarind Contour mode...something definitely not correct in this code...you got to review the right manual !

Contour mode is well described in OEM manual .... It includes commands like CM/CT/DT/WC Did you clearly understand way of Contour mode.. A drawing/sketch of the intended contour mode would be welcome here before to guide you on a solution

Hello How the programm ended ...i MEAN i dont see end on the program

You can at least try to get trend view of SSDIFF1 ..& L52B_SEL...see if you get any interference/inappropriate/incorrect behaviour /operation during auto synch or Manual synch... Any time!

What are you tryin to say here ...about that nuisances voting mismatch diag alarms.. What is the link with GSU ...thx for clarifyin ...

Ok Can you develop on this RCA..

Hi Ok will have a read on this thread...

Csa I was telling to original poster to be aware of precautions to have before doing a " soft reboot"... I did not "advocated" him to do it..but suggesting this solution ( and beware him about instructions to follow prior to do it by reading teh OEM right technical manual for sure!;)

1 Appreciate to talk here and trying to support as best as I can ! There is also a switch for rebooting TCEA card on PD core.. did you tried that one ... One suggestion would be, re-booting that TCEA card by using the switch in the <P> core. Thanks for your inputs much appreciated.. Stay...

Did you look at the tab called "12 BITS rtu READING SECTION" .. Looks like you were trying to read at the wrong place... For me RTU reading would be on that section ... Can you developp on that 9FC3 is is kind of calculation you did or a value that you got from somewhere...

Thanks for the impurs... P core (TCEA card) is "standard" got is own firmware and cannot be modified application whitout chnaging EPROMs as per OEM manual... Did you ever did a soft reset on SDCC ...as you seems to have done "Hard reset "...We know that some are not conviced by "soft reset "...

Can original poster reply..

Try a modbus simulator and see if you get datas sending out and receiving properly first... Then you will know which place to troubleshoot..

Try to create and view alarm form Acculink user interface ...you may know better on why you stuck... Also thx for replying to my last QUESTIONS on RS 232 CAN YOU CONFIRM.. Any time!

Yes telnet is for Ethernet card configuration but on serial interface it is shown CH1 on manual after RS232 is that correct..

Are the Terminination Resistor wired correctly as in it looks like a daisy chain ( see page 42 of the manual)..