Search results

Have you tried using a TON timer with a compare block to check if the jam time is within the 8–11s window, and then latch a pulse output just once? Also curious what’s the best way in TIA Portal to ensure an output is triggered only once when a condition is true within a time window?

Did you check if the firmware version on the new UCSBHA4 matches the one used during the backup, and could a mismatch cause similar boot issues?

That sounds like a double-throw (SPDT) limit switch, one contact closes in one position and the other in the opposite. Have you checked if industrial roller-type limit switches fit your setup, and would you need it to handle any specific voltage or load?

Have you tried optimizing by using word-level addressing or structuring tags as arrays? Also, does your HMI platform support indirect addressing or tag multiplexing to cut down on address count?

Secondary burnout isn’t something you want on a 7EA or 9E. Do you think thermal fatigue from frequent startups could be a factor here, or is it mostly linked to fuel nozzle issues?

It sounds like you're looking for practical, short-term training in Instrumentation and Controls. A few well-regarded schools that offer specialized programs in this field are the Universal Technical Institute (UTI) and the Pennsylvania College of Technology. You might also want to check out...

For your application, consider Phoenix Contact's MACX MCR-EX series galvanic isolators. Ensure it meets the voltage and current specs for your speed probe and is certified for Zone 2, Group IIB. Check with a distributor for compatibility.

Hi! For the Tatsuno communication protocol, you might want to check any official documentation or resources from Tatsuno, as they typically provide the protocol specs for their systems. You could also look into industry-specific forums or reach out to suppliers for the relevant documentation...

I think it's great that you're conducting a survey for your internship project. Best of luck with your research! Just a heads up, it's always a good idea to provide more context about your project and the purpose of the survey to avoid confusion. I hope you get plenty of helpful responses!

Yes, a VFD (Variable Frequency Drive) can increase the speed of a 1725 RPM motor by adjusting the frequency of the power supplied to the motor. However, keep in mind that there are limitations to how high the speed can go without affecting the motor's performance or lifespan. Always check the...

For efficient toxicity detection in production, consider electrochemical sensors for gases like CO, H2S, or NH3, photoionization detectors (PIDs) for VOCs, and infrared (NDIR) sensors for CO2 or methane. Optical and fluorescence-based sensors work well for liquid toxicity. Integration with IoT...

No, the load-side wire of the UL1077 breaker can be sized based on the UL1077 breaker's rating, not the main UL489 breaker. As long as the wire is properly rated for the load and the UL1077 breaker provides appropriate supplemental protection, you can use a smaller gauge suited to the specific...

Yes, alarm rationalization using standards like EEMUA 191 in Cimplicity is possible, though its Alarm Classes offer more flexibility than just Low, Medium, and High. Some organizations retain the existing classes, mapping them to L, M & H for consistency, while others simplify their alarms to...

It sounds like you're at a crossroads in your career, and both paths have their pros and cons. A smaller company gives you hands-on experience and autonomy, while a larger company provides mentorship and structured learning. If you feel stuck, a larger company might expose you to new challenges...

You’ll want a precision low-flow meter, and brands like Bronkhorst, Alicat, or Omega are great places to start. They offer models with 4-20mA or 0-10V output, built-in displays, and external power options. Just make sure it supports 1/4" tubing and allows easy unit conversions. Hope that helps!

Hello, Thanks for sharing the article! The Raspberry Pi SBC-based products mentioned in your link often require custom PCB designs for expansion boards, shields, or embedded applications. In that context, understanding PCB vias is crucial, as they play a key role in connecting different layers...

Yes, you should update both the host and the virtual machine (Windows XP) with malware protection. If the VM is connected to the internet or shares files with the host, it can still be vulnerable to threats, so keeping its security updated is important.

It sounds like the loss of communication between the HMI and the Mark VI could be due to the dead CMOS batteries on the UCVE cards, which may have caused a loss of important configuration settings. After replacing the batteries, you may need to reload the Mark VI configuration using the Toolbox...