Search results

Powerisland, Thank you for the feedback! Glad to hear all is running well now.

dannys, Typically, the logic signals associated with 33CB-1 and 33CB-2 are l33cb1o and l33cb2o. The limit switches are usually wired to the normally open contacts, and the switches are actuated when the valves are closed--which means the contacts will be closed when the valves are closed. The...

A LOT of sites never check their T/C wiring all the way from the exhaust JB to the Mark VI terminals. There are VERY specific ways T/Cs have to be connected to T/C extension wire, and if the unit weas provided by GE then special T/Bs are used and there are VERY specific ways T/C and T/C...

Have you contacted Moog directly? I just read Moog have opened an office/facility in India. It's not clear from your post if you're looking for a "rebuild kit" for the servo or the hydraulic actuator (double-acting cylinder) I've never heard of a "rebuild kit" for a servo, and certainly I...

Basically, you're saying you believe that the Mark VI should be tripping the GE-design Frame 6 heavy duty gas turbine because the individual exhaust T/C bargraphs are turning red and yellow when the unit is at Base Load. GE, in their (not so) infinite wisdom (mistakenly) thought it would be a...

Hello Friend, Good Day. You haven't told what kind of turbine you are working on, and which Trip Card (TCTG; TCTS; or TCTL) is installed in Loc. 4 of the <P> core. You need to look at Appendix D, Signal Flow Diagrams, in GEH-6195, and find the drawing titled: "Emergency Trip Pushbutton...

sms, Sorry; I missed your last post. Thanks for the feedback! Congratulations for getting the download done. However, can you tell if the accumulators are incrementing properly now--even if the data values might not be correct? TOTD_Q.DAT is the Totalizer Data file. It is in Intel...

MARKlaneV, >Questions: >1. Is step 3 the correct string to upload TOTD? If you're going to upload TOTD file, you should FIRST save the existing TOTD_Q.DAT (or TOTD_Q.AP1) on the operator interface to a back-up directory, or give it a unique filename extension (like .SAV, or your...

iffi08, As I know, it's impossible for us to know what, or how long, your experience is. I'm keenly aware of the language barrier, as well. In my advanced age, I'm also coming to realize that discussing something with one's staff is all well and good, but at some point in the process a...

glenmorangie, Once people get these ideas in their head about absolutely having to have the unit on cooldown for some minimum period of time before starting the unit (with flame and accelerating it to FSNL for synch and loading), it's just about impossible to get them to reconsider. Granted...

>>Hmmm.... I'm not sure which file you are taking the >>information above from? There should be a TOTT_Q.SRC from >>BEFORE the change made by BHEL, and one AFTER the change >was >>made by BHEL. Did BHEL add the plus sign? >>You also said that ONE of the units at your site is having >a...

http://m.control.com/thread/1516524277#1516643184

MARKlaneV, >I could use some moral support and shared expertise here. Hmmm.... TOTT_Q.SRC is the file you want to edit (REGARDLESS of what it says in the comments at the top of the file; yet another example of consistent inconsistency). Suggest saving a back-up first (say, as TOTT_Q.ORI)...

>I found a discrepancy in TOTT_Q.SRC file of that faulty >unit:<pre> >3 FQG +126 ; 128 >3 DWATT_TOT +384 ; 384 >3 DVARP_TOT +384 ; 384 >3 DVARN_TOT +384 ; 384</pre> >+126 is definitely wrong I...

>1. Analog Trigger Value: (I don't understand what you suppose to mean) The value in the third column is the Analog Trigger Level (see the comments at the top of the file). >2. On 13th March, 2016 (earlier I said 2015 in my 1st >thread) it was noticed that analog counters stopped working...

You can look up "autoignition temperature of natural gas" or methane using your preferred World Wide Web search engine. If you have a recent natural sample analysis that may include the value, or you can ask the company performing the analysis to include the value. Generally, the...

>Reply: yes is it Voltage droop method & one more method is >Isochronous for Load sharing. > >>Methods heard of: >> >>- Synchronous or Asychronous or Sonchrounous!? >>Was said so quickly I didn't catch this term properly, I >>guess it's one or the other... Generator exciter control...

It would be VERY unusual to find SET_CNTR.EXE in a G:\EXEC file. I found this in some old documentation:<pre>Type 3 - Analog - Time Averaged Analog Accumulator. Configured with Variable Control Signal. Totalizes the result of dividing the accumulated minute averages for the...

SMS, Thanks for the clarifications. Yes; the Designated Voter is where the Timer & Counter Values you see on the <I> display come from. (The ARCNet-based network is called the StageLink.) You have supplied the correct file. (The .BAK files are the back-up Intel hex-format files...

Hello, Have you looked in the Mark V Maintenance Manual, GEH-5980, and the Mark V Application Manual, GEH-6195, for information about StageLink configurations? The shorted StageLink cable permissible, if I recall correctly, between nodes is 3 metres, but somehow I think you didn't mean...