D
Good morning
Please help me to resolve this problem.
We have a compression station - gas - it has a MOORE PLC
The control of the station is by the DCS HARD we have 3 Moore PLC BY THE soft we have :
1 enginering workstation with NT4 SERVER
2 operator workstation with NT4 WORKSTATION
THEN WE HAVE EWS1 OWS1 OWS2
THE EWS1 IS OK
THE OWS1 IS OK
BUT OUR PROBLRM IS WITH OWS2
we tried scandisk C:\ , there is many bad
clusters.
we don't know the procedure to reistall all the
softs.
we tried to ghost the partion C:\ of the OWS1
THE RESULTS IS NO GOOD
WE HAD changed a few parameters about
the node . the network card installed is MNET with 2 cables inputs A B. the second network card is for to link the 3 ews1 and ows1 and ows2 it is no good.
we tried many thinks but no results please help me to resolve this problem
my email is [email protected]
thank you
Please help me to resolve this problem.
We have a compression station - gas - it has a MOORE PLC
The control of the station is by the DCS HARD we have 3 Moore PLC BY THE soft we have :
1 enginering workstation with NT4 SERVER
2 operator workstation with NT4 WORKSTATION
THEN WE HAVE EWS1 OWS1 OWS2
THE EWS1 IS OK
THE OWS1 IS OK
BUT OUR PROBLRM IS WITH OWS2
we tried scandisk C:\ , there is many bad
clusters.
we don't know the procedure to reistall all the
softs.
we tried to ghost the partion C:\ of the OWS1
THE RESULTS IS NO GOOD
WE HAD changed a few parameters about
the node . the network card installed is MNET with 2 cables inputs A B. the second network card is for to link the 3 ews1 and ows1 and ows2 it is no good.
we tried many thinks but no results please help me to resolve this problem
my email is [email protected]
thank you
