we have a project already tac and we want to integrated with sauter via OPC. there are two ways, either to get OPC from tac aleadrdy parameterized then we will connect to our open system, but if tac were not cooperative we have to get any OPC and set the parameter by our self?!!? is it doable, has anybody done it before?

 

What is "tac" and "sauter"?

Jonas Berge
SMAR
==================
[email protected]
http://www.smar.com
Learn Fieldbus at your own pace: http://www.isa.org/fieldbuses

 

Sauter and TAC are both making bms systems

You can buy an OPC client from Sauter...I don't really se your problem