Problem: Industrial Free standing NEMA 4 Enclosure installed on concrete pad. Conduits turned up in concrete and enter through the bottom of the enclosure.
Interested in best practices, watch-outs, and products (general). There is no skirt kit available. Not sure what would be acceptable.
I have extensive experience with the installation of this type of equipment in indoor industrial and manufacturing settings. I am struggling with how to maintain the rating of the enclosure in this case. Seen other applications where a rectangle hole is cut to match the outside perimeter of the conduits and the enclosure edges are sealed once the enclosure is in place. This doesn't seem very professional.
Interested in best practices, watch-outs, and products (general). There is no skirt kit available. Not sure what would be acceptable.
I have extensive experience with the installation of this type of equipment in indoor industrial and manufacturing settings. I am struggling with how to maintain the rating of the enclosure in this case. Seen other applications where a rectangle hole is cut to match the outside perimeter of the conduits and the enclosure edges are sealed once the enclosure is in place. This doesn't seem very professional.