K
The baseload output of our GE frame 9E has reduced considerably from 110MW to 95MW in spite of the fact that we have carried out air inlet filter change and an off-line compressor water wash. We only had a Major Inspection on this unit about 8months ago. All other parameters look normal. What might be cause of this problem?
Please be mindful of the fact that we are in temperature control (hence Baseload), but fuel flow has reduced from the usual 8.2kg/s to 7.6kg/s with a cpd of 10.6, ctd of 363, ttxm of 560 degrees Celsius.
Please be mindful of the fact that we are in temperature control (hence Baseload), but fuel flow has reduced from the usual 8.2kg/s to 7.6kg/s with a cpd of 10.6, ctd of 363, ttxm of 560 degrees Celsius.