Invertek Optidrive E4 VFD Adds Connectivity and Maintenance Tools
The Optidrive E4 from Invertek supports a wide range of motor technologies, with USB-C configuration, Bluetooth access, and operational data for maintenance.
Invertek’s Optidrive E4 variable frequency drive combines broad motor compatibility with connectivity and diagnostic features designed to simplify setup and maintenance. The drive supports motor technologies ranging from IE2 to IE5 induction motors to permanent magnet, synchronous reluctance, and brushless DC types. USB-C allows technicians to configure the drive without applying main or control power, while integrated Bluetooth provides wireless access to parameters. The E4 also supports PROFINET, EtherCAT, Modbus TCP, and EtherNet/IP, along with a Flight Recorder feature that provides access to operational data for troubleshooting and predictive maintenance. Available in two sizes, the drive targets OEMs seeking a flexible solution for energy-efficient motor applications.

The two versions of the Optidrive E4. Image courtesy of Invertek Drives
The Optidrive E4
As OEMs and factories continue searching for more energy-efficient drive solutions, Optidrive is releasing the E4, a VFD engineered specifically for that. Highly efficient motors, such as IE3 and IE4 motors, require VFDs with special features that can accommodate electrical and thermal differences. The Optidrive E4 supports IE2 to IE5 induction motors, AC PM, SynRM, LSPM, and brushless DC motors, as well as hybrid permanent-magnet-assisted reluctance motors. This wide selection of compatible motors makes the E4 an excellent choice for machine builders who want to standardize on VFD selection.
Available in two sizes, the E4 supports input voltages from 110 VAC to 480 VAC and operating temperatures of -20 to 50 °C. Each version has 4 programmable digital I/O points and two analog ports that can be programmed as digital I/O. You can configure parameters via the integrated keypad, Optitools, or the USB-C programming port. A 7-segment display shows current settings and supports configuration.
Advanced Features Of The E4
Most E4 installations will likely use a fieldbus technology. The E4 supports PROFINET, EtherCAT, Modbus TCP, and EtherNet/IP. The E4 uses these technologies with its “Flight Recorder” feature. This feature provides real-time access to specific operational parameters to support predictive maintenance and reduce downtime.
The USB-C connection allows integrators to configure the drive without supplying main or control power to the unit. USB-C power enables the controller and allows you to configure parameters through Invertek’s software. If a wireless approach is more your speed, the E4 has integrated Bluetooth, which you can use to configure parameters with the drive powered on, without a wired connection.

Automated equipment that likely uses a VFD. Image used courtesy of Unsplash
Predictive Maintenance Made Easy
As VFD technology advances, pulling data from devices becomes faster and easier. The Optidrive uses commercial technology such as Bluetooth to give maintenance techs remote, wireless access to operational parameters. Reading the parameters gives technicians the information they need to determine whether motors need servicing, and they can access it simply using their phone. The same parameters are available over the fieldbus communication protocol. This allows machine builders to expose key parameters to Edge devices and data collection servers for extensive AI predictive maintenance tools.
Reducing downtime and energy consumption is a task that most factories are currently working on. Designing equipment with VFDs like the Optidrive E4, with advanced IIoT features and support for high-efficiency motors, sets factories up for success in achieving this goal.
