i have problem with the rsview32 \slc505 ethernet
i see the plc but in the rsview i cant see the plc
it's like i don't have comm but also this i checked & this is also
good

 

There are several possibilities, heres two you might check -
1. If you are using RSLinx Lite, RSView won't be able to see the controller. Look at the top of your RSLinx window and see if it says "Lite", if so, you'll need to upgrade.
2. Did you create a DDE topic for RSView to look for? This is done within RSView, and may be a solution.

 

I'm writeing some new RSView32 labs and have finished the Comms sections which you can find here: ftp://www.eagleweb2.com

Probably RSLinx Lite, but don't use DDE with 5/05, use a channel and node - I explain all this and why in the labs

Good Luck,

Shawn ShawnMichael.com