Can any body give the details of the N2 Link procol of the Johnson controller.

 

I have developed an interface for the N2 Open and DX9100 protocols. You can contact me off-list for details at:

[email protected]

Curt Jeffreys
CW Industries

 

Hi

FieldServer Technologies has a Metasys N2 driver which covers N2 open and DX9100, this driver can be mapped to any of the other drivers from FieldServer Technologies.

Have a look at the following link to view an integration note. http://www.fieldserver.com/about/appnotes/metasysN2013.asp

Regards,
Richard

 

Hi

Where can i get all the details to implement the N2 protocol to connect a Johnson Controls device to some other Data Acquisition System?

Regards,
Ajay

 

Hi Ajay

FieldServer has a Metasys N2 driver which includes Metasys N2 open, DX9100 and VMA please have a look at the following link for further details, http://www.fieldserver.com/products/drivers/driverMetasysN2.asp a connection from Metasys N2 to other protocols such as BACnet , LonWorks, Modbus etc is then possible with the FieldServer communication bridge.

Thanks,
Richard

 

If your interested in creating an N2 device yourself you'll need the N2 Protocol Documentation. This is only available from Johnson Controls. In this link you can obtain a copy of Johnson Control's N2 Protocol order form. http://members.aol.com/swftec/N2OpenPr.zip
Regards and Good Luck!

 

i would like to talk to you abought your n2 driver
please call 203-948-3200