Control

Communication Between Control Logix and Centum VP Using Ethernet/IP

P

Thread Starter

Psahu

There is two nos. of layer-2 switch between AB PLC and Yokogawa ALE111 card. we have tried to communicate using straight and cross cable but can't succeed.

There might be some error related to address translation (Setting of ALE111 Card).

Is there any method to check that whether data coming from PLC end or not? Hence we can identify problem end.

request to provide some settings for ALE111 and PLC if we are missing.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
LamijaZ Communication between ABB RTU530 and Siemens 7SJ62 using IEC 60870-5-103 protocol General Automation Chat 0
D ModBusTCP communication between ABB AC800M CI867 and Schneider P3U30 Modbus 0
Wahidulislam Siemens SPPAT3000 flickers the communication between 3 io modules of a rack Distributed Control Systems - DCS 0
frd1982 establish communication between ABB CI854 and IM153-2 ( redundant) Distributed Control Systems - DCS 1
S Modbus Communication between GE PLC E05 and Control Logix PLC Modbus 1
Similar threads
Communication between ABB RTU530 and Siemens 7SJ62 using IEC 60870-5-103 protocol
ModBusTCP communication between ABB AC800M CI867 and Schneider P3U30
Siemens SPPAT3000 flickers the communication between 3 io modules of a rack
establish communication between ABB CI854 and IM153-2 ( redundant)
Modbus Communication between GE PLC E05 and Control Logix PLC

You May Also Like

Top