Dear Reader

i am using TSX MICRO and TSX Primum PLCS. I want to configure it in master slave configration, i.e. Premium as Master and TSX MICRO as slave.

Please help me, its urgent

 

Communications is extremely easy. You can connect the TSX 3722 to the Premium via Unitelway. The Premium can be configured as the master. The Micro can be a slave device. Connect these units via the serial ports and an ACC 4 interface. The ACC4 has a MASTER/SLAVE switch located inside the enclosure, set accordingly. The MASTER/SLAVE confiuration is set in the processor configuration screen in PL7. Access the HARDWARE configuration from the menu tree on the left and double-click on the processor, then go to the comm port from the pull-down menu. Set the Premium for MASTER operation and the Micro for SLAVE, and set the address. Be sure to select three (3) address in the SLAVE configuration. Pay close attention to the wiring of the ACC4, that will get you every time! Good luck! Trouble, call 8000-468-5342.

Dave Zimbrich
ex-Schneider