Facebook
Google
GitHub
Linkedin
Hello Control Community
We had a problem with our frame 6 ms6001 GT controlled with GE Mark 5 TMR
The problem has begin last week the GT wasn't able to fire up. no work has being done on the GT
FQL1 at 3% at 20FL openning pressure is at 5 bars
The 3 77FD's looks identical
We check the 2 spark plugs they works fine
we check the nozzles of the chambres 1 & 10 they work fine
Check valves of the 10 nozzles works fine
we suspect the booster and we changed; same result ignition failed
we put an external source of air we had ignition once we tried again same way we had same problem
any suggetion please
We had a problem with our frame 6 ms6001 GT controlled with GE Mark 5 TMR
The problem has begin last week the GT wasn't able to fire up. no work has being done on the GT
FQL1 at 3% at 20FL openning pressure is at 5 bars
The 3 77FD's looks identical
We check the 2 spark plugs they works fine
we check the nozzles of the chambres 1 & 10 they work fine
Check valves of the 10 nozzles works fine
we suspect the booster and we changed; same result ignition failed
we put an external source of air we had ignition once we tried again same way we had same problem
any suggetion please
