This is a printer used in MK5 MS-DOS system. when the printer switched on, after a gap of one week of its failure, with the turbine running condition, the printer stars printing all the accumulated messages for all these days. How to flush out the accumulated messages from printing. Need help. Thanx...

 

From a command prompt you need to type the following command, then press ENTER:
<p> LOGGER FLUSH</p>Then you need to switch off the printer and unplug it from its mains power and wait approximately 3-5 minutes for the RAM in the printer to "lose it's memory".

Then plug the printer back into its mains power, switch the printer back on and put in on-line with the <I>.