J
Trying to perform schedule ControlNet connection between 1747-SCNR/A FW Rev 1.4 and 1756-L55/A !756-M12/A Revision 12.25. Following example in App. Note A20389. RSLogix 5k version 12. 1756-CNB 5.044 Build 030.
Created generic profile for the 1747-SNCR as done in app. note. When finished the Module Properties- Module Info dialogue box shows "Status = Faulted" and "Module Identity: Mismatch".
RSnetworx for Controlnet 4.11 shows both nodes on the network. View > Connection Status in Scanlist Configuration Tool shows the connection as "Connection open is pending"
Any suggestions? Thanks
Created generic profile for the 1747-SNCR as done in app. note. When finished the Module Properties- Module Info dialogue box shows "Status = Faulted" and "Module Identity: Mismatch".
RSnetworx for Controlnet 4.11 shows both nodes on the network. View > Connection Status in Scanlist Configuration Tool shows the connection as "Connection open is pending"
Any suggestions? Thanks
