Hi,
First time posting, have been an avid follower for quite some time but now in need of some ideas.
Running +LM2500 with DLE (PGT25+/2 stage with pip kit upgrade) MkV has had processor upgrade to DS215...ect
Recently had trouble with processor idle time when viewed from DiagC (processor idle time is down to 15% - 10% when running a view2)
Changed R processor and checked Arcnet cabling but no real joy in improving this overall.
Start ups have exhibited slow HMI graphics and even stalls on purge and ignition delay timers but overall no evidence of severe issues when trawling through DiagC for explanations.
Havent stopped/started the TCI yet but this will be the next port of call however I feel this might be fruitless.
Help
Regards
Animal311
First time posting, have been an avid follower for quite some time but now in need of some ideas.
Running +LM2500 with DLE (PGT25+/2 stage with pip kit upgrade) MkV has had processor upgrade to DS215...ect
Recently had trouble with processor idle time when viewed from DiagC (processor idle time is down to 15% - 10% when running a view2)
Changed R processor and checked Arcnet cabling but no real joy in improving this overall.
Start ups have exhibited slow HMI graphics and even stalls on purge and ignition delay timers but overall no evidence of severe issues when trawling through DiagC for explanations.
Havent stopped/started the TCI yet but this will be the next port of call however I feel this might be fruitless.
Help
Regards
Animal311