Texas instrument PLC


Thread Starter

Mahdi Elkawafi

i am using a texas intrument PLC with the following hardware configuration
PS system 505
CPU 535-1212
I/O cards

the plc is in stop mode and i donot have the programming software package for this type of plc, but i have sysmate syswin CPM1 ver 3.2a for OMRON PLC with the interface cable between plc & PC, can i use the package to put the texas
instrument plc into RUN, please advice me as soon as possible

thank you in advane


Daniel Chartier

Hello, Mr. Elkawafi;
You must use a software known as TiSoft and a RS-232 null-modem cable to communicate with a TI505 PLC. In Canada, only a company named ONTOR supports these PLCs. I suggest you contact Mr. Youssef Asmi at "[email protected]", mailto:[email protected] ; I am sure that he will be able to help you out Also, on the "www.sea.siemens.com":www.sea.siemens.com , you will be able to download all manuals and tecvhnical notes on these PLCs.
Hope this helps,
Daniel Chartier
Montreal, Canada

Michael Griffin

TI's PLC division was bought by Siemens several years ago. Contact your local Siemens representative for support on this product.::

Michael Griffin
London, Ont. Canada

Joseph Luft, FasTrak SoftWorks, Inc.


FasTrak produces a 32 Bit Windows based programming package called 505 WorkShop which supports the entire 505 line. The TISOFT won't fully support the most recent 1105/1106 models (SmartTune, etc).

You can download a demo at "www.fast-soft.com":http://www.fast-soft.com . Contact me if you have any questions.

Ontor in Canada does handle this product as well.

Thanks. Joe
Joseph Luft ([email protected])
FasTrak SoftWorks, Inc