Search results

Thanks for your feedback BillC! Do not hesitate to share your achievements here... Any time! James

Oh okay ! I see the mentionned POTs R10, R11, R14 & R37. There is schematic diagram showing them..but no more informations ... You may have to get the specified card sheet /manual so...

There is also single range type for the AO card : 0-10vdc@5ma max

Hi I know that there is DIP switch for configuring AO as 1 to 5Vdc or 4-20mA I got a good manual for the mentionned device i will try to attach here... You can share a web sharing site or other support so i can share it ! As file size is too big to get it attached here I see other...

@gubavac111 Can you share a quick feedback on the status at site /yacht...Regarding that issue that you posted here. ControlsGuy25

As you can see on these lasts posts....There is so many points to study .... So thx for your feedback ! You are welcome james

Sequence of Electrical Work Electrical system calculations for most projects are an iterative process. Sufficient data is not available at the beginning of a project to make final calculations. However, calculations must be made early in the project to properly specify the electrical equipment...

Power System IEC References International Electrotechnical Commission (IEC) 60038 Standard Voltages 60059 Standard Current Ratings 60076 Power Transformers 60364 Low Voltage Electrical installations of Buildings 60909 Short circuit currents in three-phase a.c. Systems 60949 Calculation of...

Diesel Generator Enclosure Self-contained enclosure shall be provided for the diesel generator set.The enclosure shall be manufactured such that all part are accessible for inspection and minor maintenance without removal of the enclosure or enclosure roof. It shall include the following...

Here is some notes iesel engine generator (DEG) system shall provide the source of standby power for critical electrical loads when normal electrical power is not available. The generator set shall be supplied as a complete package comprising diesel engine, generator, controls, cooling...

Diesel Engine The diesel engine is the most important part of the genset. It is the prime mover that drives the generator (alternator) to produce electricity. All diesel engines are similar to each other in the concept but they differ in many aspects such as the number of cylinders, if the...

Hi Have a attentionned read on this article from the link below: https://najahengineering.com/diesel-generators.html Thats a interesting approach for Diesel genset & plant designing and optimization I am sure that can highlight some points that you are looking for! Always glad to support ...

It's not working by this way here..you post is just like " incomplete" No infos/datas..

Oem/vendor type model of the devices...

CSA, Thank you for these clarifications, I am not familiar with frame 5 dual shaft units.. Controls.... You are right about engineering units... I don't know how someone can operate such unit with these HMI displaying... FUNNY ISN'T IT...in the same time its just frightening yes I agree... Not...

Again as we stated whithout be able to check CSP file that will be difficult to give better support ...

CSA I have reread your post and one question come to my mind: You stated that :"As I recall fuel control is for LP shaft speed, and nozzle control is for HP shaft speed" Would you mean that Fuel control is for HP (not LP ) shaft speed and Nozzle control is for LP (Not HP) shaft speed... Thx...

Also what about FSR ACC as CSA mentionned we only see FSRSU ( start up )

Do you know why we dont see 14HC status mode in displaying...