Facebook
Google
GitHub
Linkedin
M
I have 3 Mark v units with 3 HMI (P2 +NT 4.0 +TCI 1.4 + cim 3.21) en the same arcnet network. (IO adr=2b0, mem adr=d0000, IRQ=15, port ISA) one is crashed.
-i bring new p3 computer
-install Windows NT 4.0
-TCI 1.02.02c (don't have TCI 1.4)and not install cimlicity.
-i try to get the communication before in network (ARCnet ISA)
-I configured the card to IO address 2b0, MeM adr d0000 IRQ 15 same as the other HMI (the windows stopped working)
-reinstall the windows changed IRQ 11(Windows stopped working)
-reinstall the windows changed io adr D4000. Window working with arcwho i have my address (00) no node detected. reinstall the windows changed IO address E0000. Window working with arcwho. i have my address 1c correct but it detects more then 100 nodes from FF FE FD FC ...... to 02 01 00 and me i have 6 nodes (FE FC FD 1F 1D 1C).
how i can resolve this problem ?
-i bring new p3 computer
-install Windows NT 4.0
-TCI 1.02.02c (don't have TCI 1.4)and not install cimlicity.
-i try to get the communication before in network (ARCnet ISA)
-I configured the card to IO address 2b0, MeM adr d0000 IRQ 15 same as the other HMI (the windows stopped working)
-reinstall the windows changed IRQ 11(Windows stopped working)
-reinstall the windows changed io adr D4000. Window working with arcwho i have my address (00) no node detected. reinstall the windows changed IO address E0000. Window working with arcwho. i have my address 1c correct but it detects more then 100 nodes from FF FE FD FC ...... to 02 01 00 and me i have 6 nodes (FE FC FD 1F 1D 1C).
how i can resolve this problem ?
