J
My computer is having USB Communicating ports only, where the operating system I have is windows 2000. I have the PL707 software and need to communicate with the NANO PLC (Telemecanique) using the USB to Serial Converter and the PLC communication cable TSXPCU1030.
the Problem that I have, communication is not possible, and computer gives my error for the communication. I have tried the same with other computer which have a serial port and it is working properly.
Please advise if there are some adjustment/configuration I have to do,
I am using the COM Port 1.
the Problem that I have, communication is not possible, and computer gives my error for the communication. I have tried the same with other computer which have a serial port and it is working properly.
Please advise if there are some adjustment/configuration I have to do,
I am using the COM Port 1.