J
Hello I try to put a normal profibus-DP network between Yokogawa ALP111(as a master) and a Siemens ET200M IM153-1(SLAVE) with a 32xDI module attached(6ES7-321-1BL00-0AA0).
We already use the SyCon obtained from Yokogawa(SyCon-PM/YOKO or SyCon-DNYOKO), and we have the License or Keycode LFS2542 for Profibus Comm. on Yokogawa CS3000 R3.08. Also we import to SyCon the ".GSD" file for "ET200M IM153-1" from Siemens.
We configure the SyCon and generate the ".dbm" file and imported to the module ALP111 properties on System View.
We fill the %%WWxxxx table on System View for the module. We download and undpate the controller, and we get a Comm. failure "CA91" on the CS3000 and a flashing BF red led on the ET200M.
We check almost everything with out results.
What do you suggest to check?
Thanks.
Jesus Carrero Blanco
We already use the SyCon obtained from Yokogawa(SyCon-PM/YOKO or SyCon-DNYOKO), and we have the License or Keycode LFS2542 for Profibus Comm. on Yokogawa CS3000 R3.08. Also we import to SyCon the ".GSD" file for "ET200M IM153-1" from Siemens.
We configure the SyCon and generate the ".dbm" file and imported to the module ALP111 properties on System View.
We fill the %%WWxxxx table on System View for the module. We download and undpate the controller, and we get a Comm. failure "CA91" on the CS3000 and a flashing BF red led on the ET200M.
We check almost everything with out results.
What do you suggest to check?
Thanks.
Jesus Carrero Blanco