M
Has anyone had any practical experience with Floating Point data files in RS Logix 500 (release 3.1.9.2) software. Currently attempts to include any instruction with a Floating Point value in older SLC 5/03 processors, brings
up an error message when the rung is verified. Data file 8 which is normally a F8 Floating Point file is found to be listed as 'reserved' (r8),
similar to a SLC 50/1 or 5/02, which is fixed.
This problem is not found on our newer 5/03 processors. Help files state floating points can be used on OS301 & OS302 processor operating systems. We have OS302's, but still some have this above problem.
Regards, Mike Lynch
Dairy Containers Ltd
up an error message when the rung is verified. Data file 8 which is normally a F8 Floating Point file is found to be listed as 'reserved' (r8),
similar to a SLC 50/1 or 5/02, which is fixed.
This problem is not found on our newer 5/03 processors. Help files state floating points can be used on OS301 & OS302 processor operating systems. We have OS302's, but still some have this above problem.
Regards, Mike Lynch
Dairy Containers Ltd