Ge Fanuc PLC communication with Rockwell SCADA


Thread Starter


I am using a GE Fanuc Versamax E05 PLC and a Rockwell Factory Talk View SCADA on a TCP-IP network.

How I can communicate the PLC with the SCADA?

Is there any communication driver available for this purpose?

Is there any possibility for a modbus TCP-IP communication?
The VersaMax CPUE05 has two Ethernet Protocols EGD and SRTP, both GEIP proprietary on its port 3 Ethernet port.

The port 2 15 pin RS-485 does have the modbus protocol available client and server.
There is an OPC Server built in to Proficy Machine Edition (the development sw used to program the versamax). No runtime license required.