We are looking for GE Rx3i PLC system but our need to operate Motorized Valves. But Motorized Valves need Pulse Controller to operate.

so my question is GE Rx3i system support Pulse Controller?

 

No,RX3i PLC donot support directly to operate Motorized Valves.It need additional Controller to Operate it.

 

No,RX3i PLC don't support directly Running MOV.
It requires additional Controller to Interface/run Moterized Valve

 

I know a number of controls guys who have programmed a PLC to run a motorized valve, but there are relatively inexpensive modules that take a linear voltage or DC current signal (like 4-20mA) and output the control signals to the actuator.

http://api-usa.com/valve_positioner.php