Having intermittent voter mismatch for the above alarms on MKV. Started out on just R core but has progressed to S & T now. Diagnostic counters are showing voltages that don't seem possible going to -150 volts to 150 volts randomly. This is happening consistently across R S and T cores but it's never the same on each core. Might see 150 on the positive and 50 on the negative, might be -122 on negative and -18 on the positive. My point is the voltages on DIAG C TCQA power supplys are all over the place. Thought we had a smoking gun with our compressor bleed valves but didn't resolve the issue.
Any help would be appreciated.
Can reply to here or email [email protected].
Any help would be appreciated.
Can reply to here or email [email protected].