Facebook
Google
GitHub
Linkedin
Recently I performed a pre commissioning on MOV ROTORK ACTUATOR IQ3.
On LOCAL MODE
The OPEN and CLOSE function is good and the DCS and HMI receiving it with status
But the mode also follow from LOCAL to REMOTE vice versa during stroking OPEN / CLOSE on the MOV locally. How can this happened?
is it from the logic function on HMI or else?
Hopefully you guys can help me as i need to troubleshoot this issue ASAP…..
On LOCAL MODE
The OPEN and CLOSE function is good and the DCS and HMI receiving it with status
But the mode also follow from LOCAL to REMOTE vice versa during stroking OPEN / CLOSE on the MOV locally. How can this happened?
is it from the logic function on HMI or else?
Hopefully you guys can help me as i need to troubleshoot this issue ASAP…..
