D
Hello listers.
I have a problem which I can't solve and I need help. My problem is I am programming an Omron PLC type CPM1A-20CDR , 20 I/O . I run it on software Syswin version 3.0 and run it on CPM1 MODE and I use Win 95 as inquired. Every function is working OK but I couldn't activate
the counters and timers . I have tried all the ways but they still don't work. Every time the input of timer is execute , timer active is same time , don't have any delay time . And also at the value I only can write from 000 to 019.
The counters have the other problems :
With any value , when input of counter is ON, it
still doesn't have any active but any time the Reset condition ON , the counter changed it's condition from OFF to ON , when reset is OFF, counter is OFF. Now I don't know how to control it and i'm looking for help.
Can anybody help me?
All your advice will be gratefully received.
Thank you.
David Brown .
(If possible, you can contact me directly via the
following address: [email protected] )
I have a problem which I can't solve and I need help. My problem is I am programming an Omron PLC type CPM1A-20CDR , 20 I/O . I run it on software Syswin version 3.0 and run it on CPM1 MODE and I use Win 95 as inquired. Every function is working OK but I couldn't activate
the counters and timers . I have tried all the ways but they still don't work. Every time the input of timer is execute , timer active is same time , don't have any delay time . And also at the value I only can write from 000 to 019.
The counters have the other problems :
With any value , when input of counter is ON, it
still doesn't have any active but any time the Reset condition ON , the counter changed it's condition from OFF to ON , when reset is OFF, counter is OFF. Now I don't know how to control it and i'm looking for help.
Can anybody help me?
All your advice will be gratefully received.
Thank you.
David Brown .
(If possible, you can contact me directly via the
following address: [email protected] )