Hello,

I'm new to plc programming. I'm trying to scale a PT-100 sensor in somachine basic V1.6 (Schneider PLC TM221M16R) to obtain a temperature range between 0 to 150 deg Celcius. The sensor is connected to an analog module with temperature input capabilities (TM3TI4G). I've configured the input as shown below.

Can someone explain how to do the programming?

 

Hello,

I'm new to plc programming. I'm trying to scale a PT-100 sensor in somachine basic V1.6 (Schneider PLC TM221M16R) to obtain a temperature range between 0 to 150 deg Celcius. The sensor is connected to an analog module with temperature input capabilities (TM3TI4G). I've configured the input as shown below.
View attachment 268
Can someone explain how to do the programming?

Shahbaaz,

I dont know if you got OEM manuals ?
You should be able, to do the programmation with manuals.

One can have look on these 2 videos , it contains some datas for programming in somachine:

It is describing analog input configuration ( 4-20 mA) and scaling/normalization.

Hope this can help,
ControlsGuy25.