R
Hi,
I have a Partlow MIC 6000 that I can't get to read a K-type thermocouple correctly. The jumpers on the boards are set correctly, the inps is set to 3 (K-type 'F') and all the other parameters are set to factory settings. I've tried other thermocouples which read correctly on other controllers but no luck. I've done the first calibration but the others need test equipment I don't have. Any quick ideas?
I have a Partlow MIC 6000 that I can't get to read a K-type thermocouple correctly. The jumpers on the boards are set correctly, the inps is set to 3 (K-type 'F') and all the other parameters are set to factory settings. I've tried other thermocouples which read correctly on other controllers but no luck. I've done the first calibration but the others need test equipment I don't have. Any quick ideas?