Red Lion Controller


Thread Starter



I was wondering if anyone might have some experience with a Red Lion G306 and a CSMSTRV2 with a CSOUT4. I have a push button setup on the HMI and I need to tag that button so that when it's pressed the output module outputs a 5-10v signal to a solid state relay which in turn, actuates a hydraulic directional valve. I'm missing something in the data tag configuration area of this and how to tag the button to turn on the output or maybe this won't work at all, not really sure at this point. I've gone back and forth with Red Lions' tech support but something is getting lost in translation, I would be eternally grateful if anyone could possibly help or nudge me in the right direction, kind of at my wits end.

Thank you,