Hello and thanks for any help in advance.

I've got a TECO MA 7200 VFD that I've been using the manual start stop buttons on for about 10 years.

I'd like to have a toggle to start/stop the machine from a remote location.

I thought I needed to jump terminal 1 with 24V+ but I am clearly missing something as nothing is happening.

I've done this with other brands of drive but I am struggling with this TECO.

Could someone familiar with this drive perhaps give me a nudge?

Thank you so much for any help.

Brad

 

https://www.tecowestinghouse.com/Manuals/A510_instruction_manual.pdf
Looking at the A510 Manual page 3-16:
You switch S1 or S2 to +24V for Forward or Reverse motion respectively, and according to note 4, link F1/F2.

Since there are many models/configurations I'd make sure the manual related to you particular VFD.