What kind of unit controls systems ??what can be causing a flame detector for frame 6B gas turbine to failing constantly.
thanks for your usual cooperation
Akin,Thanks
the alarm annuciated is that: flame detector trouble on the HMI screen so after that the flame detector was replace with another one.
unit control system is speedtronic mack VI frame 6B
DiPlease have a read on this excelllent old thread (CSA and other good engineers discussed about flame detector issue on frame 6b ):
https://control.com/forums/threads/gas-turbine-flame-detection.48308/
ControlsGuy25.
DiPlease have a read on this excelllent old thread (CSA and other good engineers discussed about flame detector issue on frame 6b ):
https://control.com/forums/threads/gas-turbine-flame-detection.48308/
ControlsGuy25.
Ultraviolet is the protocol for the sensor "detection method "OEM is ultraviolet,
Flame intensity is 200%-1000%
There is no cooling provision
Di
HoneywellUltraviolet is the protocol for the sensor "detection method "
It would be great to precise OEM/MANUFACTURER like Reuter stokes, Honeywell....
ControlsGuy25
Ok so have a read on this thread it is very useful for troubleshooting that issue:Honeywell
by Seth Price
by Bob Odhiambo
by Seth Price
by Bob Odhiambo