Search results

Did you tried reflashing from USB pen drive ? Most of the times, this will help in recovery. If its not coming online even after reflashing then recommended to get in touch with the OEM for Failure Analysis. By the way, you did not mention what is your Mark VIe runtime version currently you are...

1.) If ToolboxST did not report any error, then could it be LED indicator failure ? 2.) Playing with Servo / VSVO on line is not recommended. You could end up in a trip. 3.) Probably at shutdown, try a reboot of both PCMI & VSVO. Many times it will help. If not get in touch with OEM for further...

Since we are talking about exciter issue, look into the exciter's controller. Technically the same controller hardware is used for both Turbine controls & Exciter controls. Some models carry additional expander carrier board for Exciter.

Try with going online from ToolboxST and see if they are in controlling state? If not, its better to get help from OEM, instead of creating further damage.

Would prefer the supplier to fix it. Usually it's the upgrade team / company's scope to ensure that everything is intact & working as expected. If you dont know what you are doing with the Memory address (Reading OR Writing a WRONG MEMORY Address), it could lead to a unexpected disaster or...

Hope by now your issue might be resolved. If not then try Ctrl+F, then in that finder pop up, disable indexer. Let me know if it helps.

This looked interesting. But unfortunately the web page is not in English. For wider reach could you please provide the link for the content in English language ? Also provide: 1.) the direct links for downloads. 2.) Have portable version which can without Admin right needs. Since in most field...

Usually Triangular Micro Works (TMW) is used for such conversions. I did not come across Moxa Gate way for this application.

Not sure, if I understand it correctly or not. In Drives, there are applications where we need to switch the Motors i.e., 1 Drive driving multiple motors but only 1 will be selected at any given point of time. In such case we do load different PID parameters corresponding to the motor selected...

Check with OEM, they may have a better solution.

Usually these controllers are extremely reliable, they don’t fail that easily. Procedure of setting up this controller is same irrespective of the application. Recommended to follow the steps recommended in GEH-6703 Sec 7.4.1.4 Configure and Transfer IP Address to UCSB / UCSC Controller. If...

communication / network issue ?

Not sure, if I under stood your requirement correctly or not. See if this helps ? IF SENSOR JAM = TRUE Then START TIMER IF [(TIMER >8) AND (TIMER < 11) ] THEN PULSE ON.

Most manufacturers would prefer to predict the motor's mathematical model very accurately so that you can have very precise control on the shaft to fraction of radians. This can be achieved only by disconnecting the load ie., " disconnected shaft" so that your load inertia will not play a role...

Its all trade off between Cost vs Features vs Cyber security. Since you mentioned there is no Control from the display, then I would prefer use any Old Mobile phone with WiFi, with Magnetic holders which you can place / attach that to any metallic surface. On the Data, for visualisation you may...

Yes, its possible. You have higher capacity drive & a small motor. In the drive configuration, enter the correct name plate details of the Motor. CAUTION: While doing Auto Tune, Load must be disconnected from the Motor shaft. Are you using V/f or vector control ?

Can't you use ready made tools like TMW (Triangular Micro Works) ?

Raise a ticket with them here: https://gepowerpac.service-now.com/ PS: You need their equipment serial number. Its a global tech support, you may get response from any country depending up on the time of ticket creation.

On cimplicity screen, if you right click on any of the interested signal, then "go to definition in logic" should take you to the correct spot. If its not at all working for all the signals, then it must be a configuration issue. Recommended to raise a ticket with OEM. For some variables - the...

Why Video is Unavailable ?