S
We are seeking a low-rate flow meter package with these parameters:
1. fluid is perfectly clean diesel fuel
2. flow rates of approx 0.2 to 3.0 US gal/minute
3. remote sensor preferred so digital display can be conveniently mounted
4. totalizer function is desired, not mandatory 5. internal battery power,
or 24VDC (or 12VDC) external power
6. sensor pipe thread size ideally 1/8 or 1/4" NPT or BSP. 7. accuracy of 1% desired, but 2% acceptable
Suggestions would be much appreciated. We are located in Tasmania, so email or URL leads would be the easiest for followup.
Many thanks,
Steve Darden
Adagio Marine Ltd.
Hobart, TAS 7001
Australia
0415/782-305
http://www.adagiomarine.com
1. fluid is perfectly clean diesel fuel
2. flow rates of approx 0.2 to 3.0 US gal/minute
3. remote sensor preferred so digital display can be conveniently mounted
4. totalizer function is desired, not mandatory 5. internal battery power,
or 24VDC (or 12VDC) external power
6. sensor pipe thread size ideally 1/8 or 1/4" NPT or BSP. 7. accuracy of 1% desired, but 2% acceptable
Suggestions would be much appreciated. We are located in Tasmania, so email or URL leads would be the easiest for followup.
Many thanks,
Steve Darden
Adagio Marine Ltd.
Hobart, TAS 7001
Australia
0415/782-305
http://www.adagiomarine.com