Facebook
Google
GitHub
Linkedin
W
Dear All,
I'm doing one project using Easergy T-200 rtu's with SCADA vijeo citect version 7.0 on IEC-104 protocol.
I'm facing a problem on communicating the scada with rtu, don't know which address have to read from the t-200. The addressing define in T-200 is not acceptable in citect it gives me an error.
I have also installed the communication driver of SCADA but still the problem persist. I'm able to read the status of T-200 on IEC simulator but when using the same addressing on SCADA it fails.
Can any one know the solution of this problem, Pls do let me know.
Have a nice day!
I'm doing one project using Easergy T-200 rtu's with SCADA vijeo citect version 7.0 on IEC-104 protocol.
I'm facing a problem on communicating the scada with rtu, don't know which address have to read from the t-200. The addressing define in T-200 is not acceptable in citect it gives me an error.
I have also installed the communication driver of SCADA but still the problem persist. I'm able to read the status of T-200 on IEC simulator but when using the same addressing on SCADA it fails.
Can any one know the solution of this problem, Pls do let me know.
Have a nice day!
