1 . I would like to ask if it's possible to actually integrate Arduino Boards with SCADA Systems like IGSS v14.0 and Ignition Maker Edition ?
Components being used:
ESP32-S2-WROOM
IGSS V14.0
2. Do I need any extra hardware or protocols to enable the Board to be able to communicate with the SCADA systems ?
Currently, I am trying to run a program to print data to the the serial com port via a micro-USB to USB Type A Cable to the computer. From there, I tried to save the data into the registers using a ModBus Library for the SCADA to read via a Modbus Driver, but it still shows no changes in the data.
I have uploaded the txt file of the Arduino Code
Components being used:
ESP32-S2-WROOM
IGSS V14.0
2. Do I need any extra hardware or protocols to enable the Board to be able to communicate with the SCADA systems ?
Currently, I am trying to run a program to print data to the the serial com port via a micro-USB to USB Type A Cable to the computer. From there, I tried to save the data into the registers using a ModBus Library for the SCADA to read via a Modbus Driver, but it still shows no changes in the data.
I have uploaded the txt file of the Arduino Code
Attachments
-
4.8 KB Views: 5