B
I am installing two SITOP 6EP1334-2BA20 power supply units side by side or next to each other in my panel. According to the manual, it mention that:
1] A clearance of at least 50mm should be maintained above and below the device (maximum depth of the cable duct, 50mm).
2] No space is required at the side.
For point number 1, is it referring to the cable duct must have a 50mm clearance away from the SITOP 6EP1334-2BA20 power supply?
For point number 2, for my case of having two SITOP 6EP1334-2BA20 power supply, does it means that I can mount the two SITOP 6EP1334-2BA20 power supply side by side without gap or space required?
Appreciate any experts here could give me some advises or inputs.
Thanks.
1] A clearance of at least 50mm should be maintained above and below the device (maximum depth of the cable duct, 50mm).
2] No space is required at the side.
For point number 1, is it referring to the cable duct must have a 50mm clearance away from the SITOP 6EP1334-2BA20 power supply?
For point number 2, for my case of having two SITOP 6EP1334-2BA20 power supply, does it means that I can mount the two SITOP 6EP1334-2BA20 power supply side by side without gap or space required?
Appreciate any experts here could give me some advises or inputs.
Thanks.