G
I am having trouble with a paint oven input.
The chart temp increases if I force the flame throttle open. Once the temp reaches about 120 the controller sends a full signal to oven controller and throttle opens until setpoint is reached then
throttles down and works fine until oven is shut off. The thermocouple i have has no numbers. it is about 2 ft tall. how do i get the controller 2 read ambient temp then send an output to my oven.
I bench tested a 3200 and it started at 13 but gave a full output.
[email protected]
The chart temp increases if I force the flame throttle open. Once the temp reaches about 120 the controller sends a full signal to oven controller and throttle opens until setpoint is reached then
throttles down and works fine until oven is shut off. The thermocouple i have has no numbers. it is about 2 ft tall. how do i get the controller 2 read ambient temp then send an output to my oven.
I bench tested a 3200 and it started at 13 but gave a full output.
[email protected]