Search results

Search everything Search threads Search blogs
You may enter multiple names here.
  1. D

    Gas Turbine Exhaust Thermocouples

    Yes, the spring loading does help boost the acceleration limit to 20+ G's, but does have its own limits. The key is quantifying the accelerations for the expected flow conditions, and sensor mounting.
  2. D

    Snieder electric tsx quantum

    Plant upgrades don't happen in a vacuum, as the engineering firm hired by the owner to organize the upgrade, is obligated to insure functionality of the new system.
  3. D

    Snieder electric tsx quantum

    Trust and confidence has to be earned by your contractor, when in doubt contact AB, at least get a second assessment
  4. D

    Is your pc or laptop not capable of using win 11?

    Good to know
  5. D

    CT BOX (Current Transformer Box) in Electromotor

    Sounds like you need to contact the vendor to insure the warranty coverage
  6. D

    Control a 3kw heater with a float valve.

    You have correctly assess the problem, a separate voltage for the switch in the device specified, together with an interposing relay to switch the higher power circuit. Beyond that you must address the electrical codes and safety in your area.
  7. D

    Control a 3kw heater with a float valve.

    What electrical experience do you have
  8. D

    The use of radar for point level measurement

    All instruments work well when tested in ideal conditions. Of course in actual service all bets and claims are at best provisional.
  9. D

    Subsequent water bath boiler failure

    You'll need to trouble shoot the entire system assuming you are also familiar with the process system, and your answer will emerge. Good luck!
  10. D

    Subsequent water bath boiler failure

    try this www.manualslib.com/manual/1276307/Dungs-Mpa22.html
  11. D

    Changing a globe valve to ball valve in a blowdown application

    Consult your valve manufacturer. You'll need the operation data for the valve (fluid, pressure, temperature), and the piping arrangement. All those details are normally provided as part of the process design.
  12. D

    Heater thyristor control panel on a centrifugal Kawasaki Compressor

    OP, you must consult the manual provided with your equipment, or contact the vendor for advice or on site service.
  13. D

    Emerson/Fisher Fieldvue DLC 3100 Level controllers

    If it is working reliably, don't fix it.
  14. D

    Plc heating system question

    You just did it yourself, as a Ladder or Logic drawing is ont a pictorial translation of your paragraph!
  15. D

    D screw in transmitter

    Might be a pressure switch...
  16. D

    Sumitomo Demag plastic injection machine

    Contact the vendor
  17. D

    Sumitomo Demag plastic injection machine

    Let us know how you solve the problem
  18. D

    Low flow sewage meter recommendation

    Apart from redesigning your treatment process, your current flow measurement is the most cost effective
  19. D

    At a Crossroad

    some of the automation societies, like ISA or IEEE, and even ASME, occasionally have onsite tours of operating plants, that will show you what's involved and where you fit in
  20. D

    Rotork IQ range MOV remote command

    Congratulations
Top