Search results

Search everything Search threads Search blogs
You may enter multiple names here.
  1. B

    Operating as long as the Voyager spacecraft..Speedtronic Mk1

    While there may be other comparable or older systems running gas turbines, it’s increasingly rare. In general, equipment of this vintage often finds its way into museums, technical archives, or private collections after decommissioning, as they serve as historical artifacts of industrial progress.
  2. B

    Challenges with 1756-CNBR/E Module

    The device might not be properly connected to the ControlNet network. Or maybe it has a physical connection issue.
  3. B

    Calibration gas detector MSA Altair 4

    Turn on the gas detector and let it warm up as per the manufacturer's instructions. The gas detector should be in a clean, fresh-air environment before starting.
  4. B

    Allen Bradley ControlLogix XT ControlNet Card Fault

    A software fault in the ControlNet card can cause it to fail to manage communication with the Flex I/Os despite the card showing a "Running" status in RSLogix 5000.
  5. B

    Auma Actuator IE24 Fault

    The IE24V alarm usually indicates an issue with the 24V control voltage. This can happen due to an insufficient or fluctuating supply voltage.
  6. B

    Fast Weight based Sorting Machine

    If you are using an analog load cell, you’ll need a PLC module capable of analog-to-digital conversion, like Delta's DVP-28SV11T2 (which has analog inputs) or a dedicated analog input module.
  7. B

    BBC GT13D Speed Adjusting Device

    ABB acquired BBC (Brown Boveri Company), so contacting ABB directly might provide leads or support for legacy equipment.
  8. B

    Floating RTD?

    You can check HOBO Water Temp Pro v2 .
  9. B

    Alstom GT13D gas turbine

    You can check here: https://alliedpg.com/solutions/alstom-gt13e2-gas-turbine/
  10. B

    Location of AVR and speed/load sharing controller for Diesel generator sets

    Placing the AVR in a separate, dedicated control panel is a safer option.
  11. B

    Auma AC 01.2 IE 24 VAC error

    Check the wiring supplying the 24V AC to the relay board. Look for loose connections, and damaged or corroded wires. Also, check the voltage drop across the wiring.
  12. B

    I've just picked up a Sako SKI780 750w VFD

    Your adjustment to 110 Hz carrier frequency addresses motor squeal but may increase VFD heat. Monitor the VFD temperature, and consider adding cooling if needed.
  13. B

    Siemens PRU 10.64

    Check the device manual to confirm which software is compatible. It can be Step 7 (for SIMATIC S7 devices) or ProSave.
  14. B

    To control maximum torque of a motor with VFD

    You can take a look at the TECO-Westinghouse (L510 Series). https://www.tecowestinghouse.com/product/l510-micro-ac-drives/ This is an economical VFD for 3-phase motors.
  15. B

    ABB ACS550 Model ACS550-U1-017A-6, Frame size = R2 15Kw will not start intermittently.

    Running in Vector Torque Control mode without encoder feedback can lead to stability issues, especially during low-speed operation. If encoder feedback isn't used, switching to Scalar (V/Hz) mode or Vector Speed Control (open loop) might be better.
  16. B

    Parralled generators to grid, one of them becomes more capacitive

    When a generator operates at low active power (real power) output relative to its reactive power capability, it may absorb reactive power, causing a leading PF. This is more likely when load demand fluctuates or decreases significantly. Devices like series capacitors or voltage regulators can...
  17. B

    Searching for Electronical/Logical Components for building a project

    You can get a DIN rail relay module and start building projects.
  18. B

    Change in armature current by changing torque only affect active power while armature current is affecting factor in both active and reactive power eq

    Changing mechanical power affects active power (PPP) because it changes the torque, which directly impacts armature current carrying active power.Reactive power (QQQ) is less affected because it depends more on the generator's excitation (field current) and less on the mechanical power.
  19. B

    Electronic sensor control using Arduino as software and Blynk console as hardware connected simulation or monitoring and infoware using IOT with stabl

    Thanks for sharing the project. If you are eager to integrate Firebase with your project, you can see here: https://www.theengineeringprojects.com/2022/03/reading-data-from-firebase-database-with-esp32.html Google's Firebase real-time database is a development platform that includes a number of...
  20. B

    Speedtronic MARK IV Manual

    Maybe you will get some helpful docs here: https://www.gevernova.com/gas-power/products/gas-turbines/9e
Top