ACS1013-W2 Communication with PLC

I have ACS1013-W2-V8-00-SM04-B0NA-0C30-0000-00000-EN ABB Drive. In the drive NPBA 12 V1.5 card is given for communication with PLC. We have Rockwell PLC where SST card is there to communicate with the above drive. What we observed is that only 10 parameters from drive communicated with the PLC with PPO-5 4 PKW 10PZD setting.

After changing the DSET parameter with DSET 1 and DSET 10, the rest of the parameters are not communicating with the PLC. We are intersted for only status word (Parameter Read only), no control word (NO Read / Write the parameter). Please help us to communicate with the Rockwell PLC.