J
We have a gasoline/water interface to be measured.
We first had a displacer many moons ago that measured this level. It has been cast away due to the many complications associated with them (If you work with them you know). Fastforward, we have tried Ohmart Vega guided wave with little success due to emulsion.
We now have a EH cap probe installed that works ok. But we will have process changes and my clear gasoline/water interface becomes very murky on the bottom (water side) and develops a emulsion layer about 3-4inch thick. My gasoline is staying the same fared value so no troubles there. When this happens we have to re-calibrate the meter, and then calibrate it back when it clears up. The changing of the media is inevitable due too the process. Looking for other suggestion what might work better. 100% full chamber, 36" span, let me know if there are any other details I might be able to provide. I do know why the water is murking up just can't do anything about it.
We first had a displacer many moons ago that measured this level. It has been cast away due to the many complications associated with them (If you work with them you know). Fastforward, we have tried Ohmart Vega guided wave with little success due to emulsion.
We now have a EH cap probe installed that works ok. But we will have process changes and my clear gasoline/water interface becomes very murky on the bottom (water side) and develops a emulsion layer about 3-4inch thick. My gasoline is staying the same fared value so no troubles there. When this happens we have to re-calibrate the meter, and then calibrate it back when it clears up. The changing of the media is inevitable due too the process. Looking for other suggestion what might work better. 100% full chamber, 36" span, let me know if there are any other details I might be able to provide. I do know why the water is murking up just can't do anything about it.