W
I want to measure the wallthickness between cooling-channals and the surface. Which supplier sells good equipment to do this job.
Diameter of the cooling channel is about 1 mm, the expected wallthickness about a few millimeters. The material is nonmagnetic metal with a conductive coating on it.
I want the adress of a supplier with good equipment for this purpose.
Kind regards,
Wilbert Rooyakkers.
Diameter of the cooling channel is about 1 mm, the expected wallthickness about a few millimeters. The material is nonmagnetic metal with a conductive coating on it.
I want the adress of a supplier with good equipment for this purpose.
Kind regards,
Wilbert Rooyakkers.