Dear All,
I'm new here, and having gone through some of very interesting and creative posts led me to post my question here.
I need to develop a tool to control the height (basically angle) of air flow gates for the poultry shed. The gates have to be at an angle at night (to avoid cold wind in) and then as the sun rises the gate slowly open up (with a programable calculated degree) throughout the day and then at night they gate close back. If possible the big waoo factor would be, if i would be able to alter/program the hourly angle based on summer and winter separately, that would make my life a lot easier.
I've been trying to find a solution but could not find a single product that can help me fix the issue, right now this is being done on manual basis and i want to automate it.
I'm new here, and having gone through some of very interesting and creative posts led me to post my question here.
I need to develop a tool to control the height (basically angle) of air flow gates for the poultry shed. The gates have to be at an angle at night (to avoid cold wind in) and then as the sun rises the gate slowly open up (with a programable calculated degree) throughout the day and then at night they gate close back. If possible the big waoo factor would be, if i would be able to alter/program the hourly angle based on summer and winter separately, that would make my life a lot easier.
I've been trying to find a solution but could not find a single product that can help me fix the issue, right now this is being done on manual basis and i want to automate it.