Hi,
Is there a way to check from the IO_CFG.LST File to get the ranges of servo outputs?
I am not sure if my servo is +/-10 mA or +/- 120 mA?<pre>
TCQA Card Definition - Socket 1 - Screen 4/21
Regulator Definition for Servo Output 1
Function type & sub-type: 77
Valid types <00, 2D, 2E, 40, 41, 43, 49, 51, 52, 53, 77, 78, 7A, 7B, 7C>
Suicide enable :- Current Fault: NO LVDT/R fault: NO
Suicide position limits (%):: Low: -5.0 High: 105.0
Current Gain: (0 to 200% rated_cur./%pos.) 1.93
Current Bias: (0 to 100% rated [10,20,40]) 2.9
Zero Stroke (0 to 6.667 Vrms) :- LVDT 1: 0.7827 LVDT 2: 0.707
100% Stroke (0 to 6.667 Vrms) :- LVDT 1: 2.992 LVDT 2: 3.003
<7> Pos limits (-128% to 128%) :- Low: -25.0 High: 100.0
<7> Integrator convergence gain (0 to 16 psi/%): 0.3
<7> Position reference Gain (0 to 2 %/psi): 0.2
Note: for type 5, enter fuel flow data on Pulse Rate screen.
for type 7, enter time constant data on screen #12.
Page 3 <Q> Card Socket Definitions Wed Apr 13 11:01:01 2011
TCQA Card Definition - Socket 1 - Screen 5/21
Regulator Definition for Servo Output 2
Function type & sub-type: 43
Valid types <00, 2D, 2E, 40, 41, 43, 49, 51, 52, 53, 64, 65, 66>
Suicide enable :- Current Fault: NO LVDT/R fault: NO
Suicide position limits (%):: Low: -5.0 High: 105.0
Current Gain: (0 to 200% rated_cur./%pos.) 1.92
Current Bias: (0 to 100% rated [10,20,40]) 2.7
Note: For type 2D&2E: Position Bias (3.46 %) = 1.28 x Current Bias
Zero Stroke (0 to 6.667 Vrms) :- LVDT 1: 0.7316 LVDT 2: 0.7245
100% Stroke (0 to 6.667 Vrms) :- LVDT 1: 3.58 LVDT 2: 3.0
<6> Pos limits (-128% to 128%) :- Low: -5.0 High: 100.0
<6> Integrator convergence gain (0 to 1 %/%): 0.3
<6,2> Position reference Gain (0 to 32 %/%): 0.309
<6,2> Position ref time constant (0 to 8 Sec) : 1.0
Note: for type 5 & 6, enter fuel flow data on Pulse Rate screen.</pre>
Is there a way to check from the IO_CFG.LST File to get the ranges of servo outputs?
I am not sure if my servo is +/-10 mA or +/- 120 mA?<pre>
TCQA Card Definition - Socket 1 - Screen 4/21
Regulator Definition for Servo Output 1
Function type & sub-type: 77
Valid types <00, 2D, 2E, 40, 41, 43, 49, 51, 52, 53, 77, 78, 7A, 7B, 7C>
Suicide enable :- Current Fault: NO LVDT/R fault: NO
Suicide position limits (%):: Low: -5.0 High: 105.0
Current Gain: (0 to 200% rated_cur./%pos.) 1.93
Current Bias: (0 to 100% rated [10,20,40]) 2.9
Zero Stroke (0 to 6.667 Vrms) :- LVDT 1: 0.7827 LVDT 2: 0.707
100% Stroke (0 to 6.667 Vrms) :- LVDT 1: 2.992 LVDT 2: 3.003
<7> Pos limits (-128% to 128%) :- Low: -25.0 High: 100.0
<7> Integrator convergence gain (0 to 16 psi/%): 0.3
<7> Position reference Gain (0 to 2 %/psi): 0.2
Note: for type 5, enter fuel flow data on Pulse Rate screen.
for type 7, enter time constant data on screen #12.
Page 3 <Q> Card Socket Definitions Wed Apr 13 11:01:01 2011
TCQA Card Definition - Socket 1 - Screen 5/21
Regulator Definition for Servo Output 2
Function type & sub-type: 43
Valid types <00, 2D, 2E, 40, 41, 43, 49, 51, 52, 53, 64, 65, 66>
Suicide enable :- Current Fault: NO LVDT/R fault: NO
Suicide position limits (%):: Low: -5.0 High: 105.0
Current Gain: (0 to 200% rated_cur./%pos.) 1.92
Current Bias: (0 to 100% rated [10,20,40]) 2.7
Note: For type 2D&2E: Position Bias (3.46 %) = 1.28 x Current Bias
Zero Stroke (0 to 6.667 Vrms) :- LVDT 1: 0.7316 LVDT 2: 0.7245
100% Stroke (0 to 6.667 Vrms) :- LVDT 1: 3.58 LVDT 2: 3.0
<6> Pos limits (-128% to 128%) :- Low: -5.0 High: 100.0
<6> Integrator convergence gain (0 to 1 %/%): 0.3
<6,2> Position reference Gain (0 to 32 %/%): 0.309
<6,2> Position ref time constant (0 to 8 Sec) : 1.0
Note: for type 5 & 6, enter fuel flow data on Pulse Rate screen.</pre>