I have two Motors that are rated 220 VAC 60 Hz being used for a pumping application. Incoming power is single phase 220 VAC and VFD converts that to 3 phase 220VAC to power the motor. Each motor runs for 12 hours at 75% of max speed. Each motor is controlled by a dedicated VFD. That is one motor runs for 12 hours straight and then it is turned off after 2nd motor is started. This continues 24/7 while alternating each motor. Now I am tasked with making this work for a customer in India that has 230VAC at 50HZ single phase power coming in to the VFD. My question is can I still keep the same motor settings in the VFD set-up (220 VAC at 60Hz) to maintain the V/F ratio with 230/50Hz as the input to the VFD? Is the VFD capable of reducing the supply power from 230 to 220VAC?