S
We wish to collect data from the Advant control system and have investigated the following possibilities:
1) IMS gateway
2) GCOM interface
3) Modbus interface
All the above methods have their disadvantages with timing, speed and CPU loading.
We wish to collect about 5000 process data which are distributed among several AC450 stations. The AC450 stations are all sitting on the Control Network on one side and the Plant network on the other side.
I am searching for any vendor or software supplier who may have an interface driver to communicate between the MB300 and a SCADA package.
1) IMS gateway
2) GCOM interface
3) Modbus interface
All the above methods have their disadvantages with timing, speed and CPU loading.
We wish to collect about 5000 process data which are distributed among several AC450 stations. The AC450 stations are all sitting on the Control Network on one side and the Plant network on the other side.
I am searching for any vendor or software supplier who may have an interface driver to communicate between the MB300 and a SCADA package.