Industrial Door Safety: Carlo Gavazzi Unveils LiDAR-Powered Safety Sensor

The LEYON-Safe-E presence sensor creates a three-dimensional safety zone around industrial doors and gates to detect people and vehicles.


News November 13, 2026 by Seth Price

Carlo Gavazzi recently released its newest door sensor, built for keeping workers safe around heavy doors, hidden obstacles, and other such hazards. The LEYON-Safe-E door sensor uses advanced 3D LiDAR technology to scan the area around the door and ensure that it is safe to open or close.

 

The LEYON-Safe-E safety sensor, based on LiDAR technology, secures doors and gates

The LEYON-Safe-E safety sensor, based on LiDAR technology, secures doors and gates. Image courtesy of Carlo Gavazzi

 

What Is the Purpose of a Door Sensor?

Consider the situation where there is a set of swinging doors in a warehouse area of a grocery store. One employee is searching for a box in overstock to put on the shelf. While he does that, he parks his cart on the opposite side of the swinging doors. Even though there is a window, the cart is not visible from the other side of the doors. A few moments later, another employee drives a pallet truck through the swinging doors and collides with the cart. Workplace injuries like this happen far too often.

A door sensor can be used to prevent these types of collisions. The sensor can detect objects on the far side of a door and notify users via a signal light. A good sensor can detect small (but troublesome) objects and quickly refresh to detect objects in a dynamic environment. The best sensors perform this in three dimensions, not just two.

 

LiDAR Advantages

A simple light sensor or curtain may miss objects, as they may not be directly in the way of the sensor, but they might be in the way of the moving door. In many cases, these sensors only provide a 2D or a low-resolution 3D picture of what is happening behind the door, leaving some objects undetected. A set of thin, stationary forklift forks might go undetected, for example. LiDAR provides a real-time, real-world, three-dimensional scan of the safety area.

The LiDAR sensor uses Time-of-Flight (ToF) measurement to determine the distance between the sensor and the surrounding objects. Its infrared laser light and continuous scanning capability provide near-real-time measurement, resulting in an accurate, dynamic map of the safety area.

 

The 3D scanning capability of the LEYON-Safe-E sensor ensures continuous protection by creating a real-time map of the doorway safety zone

The 3D scanning capability of the LEYON-Safe-E sensor ensures continuous protection by creating a real-time map of the doorway safety zone. Image courtesy of Carlo Gavazzi

 

LEYON-Safe-E Sensor

Carlo Gavazzi’s LEYON-Safe-E door sensor is designed to perform continuously, even in harsh environments. It is rated to IP65 and operates from -30°C to 55°C, making it suitable for refrigerated storage as well as rooms with steam pipes or chemical processing areas.

One of the key features of the LEYON-Safe-E is its ease of installation and configuration. There is an automatic teach function that enables users to specify the safety zone around the door where the sensor should trigger an alarm. Configuration is performed quickly via a web application, which simplifies changes and reduces startup time.

 

Enhancing Workplace Safety

Door-related injuries are often overlooked. A door alarm that is simple to install and configure lowers the barrier to entry in protecting workers from door injuries. Suitable for use with virtually any blind door, even in harsh environments, the LEYON-Safe-E is a good choice for heavy industry, commercial kitchens, warehouses, and other locations where door injuries occur.