Latest Metal Articles

Have you ever needed to know the position of a hydraulic cylinder at any given point? Balluff’s new BTL K sensor uses…

Have you ever needed to know the position of a hydraulic cylinder at any given point? Balluff’s new BTL K sensor uses magnetostrictive technology to provide constant, accurate positioning.

KEB Automation has added new functionalities to its F6 drive controllers and S6 servo drives. The enhancements include…

KEB Automation has added new functionalities to its F6 drive controllers and S6 servo drives. The enhancements include hardware and software-based updates focused on efficiency and usability.

Inputs and outputs play crucial roles in various automated processes. This article will explain the variances between…

Inputs and outputs play crucial roles in various automated processes. This article will explain the variances between digital and group I/O and offer guidance on setting up each type through Ethernet.

Universal Robots have increased the payload capacity of their high-payload UR20 and UR30 cobots when the cobot is in the…

Universal Robots have increased the payload capacity of their high-payload UR20 and UR30 cobots when the cobot is in the top lift position.

The simple tasks can lead to the most failures. Basic practices in the wiring assembly stages of a project can lead to…

The simple tasks can lead to the most failures. Basic practices in the wiring assembly stages of a project can lead to long-term success or haunting tales of intermittent yet persistent failures.

The Robotics division of ABB has contributed both hardware and RobotStudio software to MassRobotics, helping drive…

The Robotics division of ABB has contributed both hardware and RobotStudio software to MassRobotics, helping drive innovation and design at the country's largest independent robotic hub.

Industrial uptime demands cabling with fast connections under harsh conditions. Belden answered the demands with a new…

Industrial uptime demands cabling with fast connections under harsh conditions. Belden answered the demands with a new portfolio of M12 connectors, making use of push-pull connector technology.

The SLC 500 PLC family dominated automation control for well over thirty years and now, with the recent discontinuation…

The SLC 500 PLC family dominated automation control for well over thirty years and now, with the recent discontinuation of most of the series, we look at the differences between SLC and modern Logix PLCs.

The new BMF line of T-slot magnetic sensors from Balluff is designed to bring simplicity and cost efficiency to…

The new BMF line of T-slot magnetic sensors from Balluff is designed to bring simplicity and cost efficiency to non-contact position measurement for pneumatic cylinders and robotic grippers.

The OPC UA protocol is designed to solve two problems in automation: interoperability between device vendors and…

The OPC UA protocol is designed to solve two problems in automation: interoperability between device vendors and independence from incompatible transport layer differences.

Kuka plans to incorporate artificial intelligence into its newly established software and digital sector to enable the…

Kuka plans to incorporate artificial intelligence into its newly established software and digital sector to enable the end-to-end digitalization of various machines and systems.

MACHINUM, the new CNC digitalization portfolio from Siemens, integrates several software technologies to build a digital…

MACHINUM, the new CNC digitalization portfolio from Siemens, integrates several software technologies to build a digital profile that can be used to optimize machining processes.

Emerson aims to simplify a multi-vendor edge environment with an open standard initiative, Linux Foundation’s Project…

Emerson aims to simplify a multi-vendor edge environment with an open standard initiative, Linux Foundation’s Project Margo. This partnership will further advance AI integration and data analytics.

Beckhoff has enhanced its TwinCAT PC-based control software with new functions and additional technology packages…

Beckhoff has enhanced its TwinCAT PC-based control software with new functions and additional technology packages designed for additive manufacturing and EDM machine applications.

The new in-line sensor indicator from Banner Engineering is designed to help users facilitate easy-to-see visual machine…

The new in-line sensor indicator from Banner Engineering is designed to help users facilitate easy-to-see visual machine status indication and troubleshoot automated systems.

Thanks to its compact design, Bihl+Wiedemann's newest addition to its family of ASi-5 counter modules offers…

Thanks to its compact design, Bihl+Wiedemann's newest addition to its family of ASi-5 counter modules offers manufacturers greater flexibility and cost-effectiveness for small-scale applications.

Some terminology, like 'normally open' and 'normally closed' switch contacts, is common throughout industry but can still…

Some terminology, like 'normally open' and 'normally closed' switch contacts, is common throughout industry but can still be confusing, misleading, or even hazardous if not properly understood.

Vention has announced the release of an AI-based motion controller and compatibility between its automation platform and…

Vention has announced the release of an AI-based motion controller and compatibility between its automation platform and ABB cobots. Both moves are aimed at simplifying the use of robotics in manufacturing.

Before tuning a motion axis, you must define the axis. If the control system doesn’t understand the axis properties or…

Before tuning a motion axis, you must define the axis. If the control system doesn’t understand the axis properties or specifications, it can’t be expected to effectively complete the tuning process.